Round Tanks

Yarrawonga Plastics manufacture our rain water tanks using one piece construction technology.
We only use Australian UV Stabilised Food Grade Polyethylene Plastic.
All Yarrawonga Plastics tanks are thicker at the base thus resulting in superior strength.
Yarrawonga Plastics tanks are all fitted with a Brass outlet, 300mm and 400mm Mosquito proof Strainer and 90mm Overflow outlet which is also Mosquito proof.

All our products are manufactured to the highest quality not price with a design to suit most needs.

This is a standard feature on all of our tank range.

2100L ROUND

Home Rain Water Tank
1180mm Diameter
2050mm Height
462 Gallons

2250L ROUND

Home Rain Water Tank
1450mm Diameter
1610mm Height
495 Gallons

3000L ROUND

Home Rain Water Tank
1450mm Diameter
2040mm Height
660 Gallons

5000L ROUND

Home Rain Water Tank
1850mm Diameter
2150mm Height
1090 Gallons

10000L ROUND

Home Rain Water Tank
2700mm Diameter
2120mm Height
2200 Gallons

 

This product is not a toy:

  1. Do not allow children to play on around the tank.
  2. Do not place anything on top of or lean anything against tank.
  3. Installation MUST be performed by a fully licensed plumber and comply with the local & Australian standards to receive maximum Government rebates.
  4. Warranty does not cover disconnection or reconnection.
  5. Warranty does not cover faulty installation.
  6. Our product is made to Australian standards.

Yarrawonga Plastics are so confident in the quality of our product that should a defect due to either FAULTY MATERIAL or WORKMANSHIP become apparent within 10 years from the date of original purchase of the product, such defect will be rectified without cost to you for replacement or shipping.

We Warrant that our product will be free from inherent defects and workmanship for the term of 10 years, limited to repair or replacement ( at our sole discretion ) for the tank only,

When making a claim on this warranty the original invoice or other similar proof of purchase will need to be provided by the purchaser,

Yarrawonga Plastics will not be liable for any personal injury, consequential losses including loss of profits or damage to property,

The liability under this Warranty by the Manufacturer (Yarrawonga Plastics) is excluded to the extent that any defect has been caused or contributed to by;

  • Improper tank installation, incorrect base preparation, base deterioration, and undermining of base of tank.
  • If the product is damaged by inclement weather, undue force, misuse or accident
  • Damage is sustained by vermin, pests or pets
  • Repositioning of the tank from its original location.
  • The ID label is removed or tampered with,
  • Any modification to the tank.
  • The tank is used for any other purpose than that of storing static water in the tank.
  • If the product is damaged by not using a flexible connection between tank and pump.

The warranty does not apply to the colour which may fade or change over time,

A one (1) year warranty only applies to the inlet strainer, overflow, brass outlet and gate valve,

This warranty does not apply to any defects specifically bought to the attention of the customer prior to purchase.

 

  1. Your new Yarrawonga round tank is to be situated on a solid level, flat base which is well compacted and free of any sharp objects, rocks or stones.
  2. A concrete base is preferred but a 75mm compacted sand or crusher dust base is acceptable.
  3. The prepared area must be at least 300mm larger than the tanks base, so that the sand cannot erode from under the tank.
  4. The overflow from the tank must be plumbed so that it discharges 300mm away from the base of the tank.
tumblr tracker